ADH-Anti Fire Coating is a water-based, non-toxic, thin-film intumescent fire-retardant product. It is formulated to meet the fire resistance ratings required for walls, floor/ceiling, and ceiling assemblies, as well as individual structural elements, as specified by the International Building Code (IBC).

• Easy to use and clean

• Non-toxic, low odor, eco-friendly

• Provides fire protection on a wide variety of surfaces

• High-performance / Fully tested

• Cost-effective

Depending on the application surface, it is

0.75 – 1.25 kg/m2 ≈ 0.2184 – 0.364 oz/ft2

12 months in its unopened original packaging.

• ADH-Anti Fire Coating is a ready-to-use product. Please do not add any additives other than those recommended in the data sheet.

• The product should be used within its shelf life. Expired products should not be used.

• The surface applied with ADH-Anti Fire Coating should not be damaged by mechanical effects while being coated, and it should be protected during the curing process.

• Freshly applied surfaces should be protected from direct sunlight, strong air currents, high air temperatures (above +5°C), rain, and frost during the first days.

• When there is a break in application, keep the packaging closed. The product should be protected from freezing.

• It should not be applied under very high temperatures, direct sunlight, extreme wind, fog, rainy, or freezing conditions. Low temperatures and high relative humidity may extend the drying time.

• It should not be applied in rainy weather, and the applied surface should be protected from rain within 24 hours.

• The surface should not be exposed to heavy traffic.

• During application, the surface and ambient temperature should be between 5°C to 40°C (41°F to 104°F).

• The consumption values in the technical data sheet represent average consumption and may vary depending on application conditions and surface properties.